"Anomalous Thermo- and Photo-Responsive Anisotropic Deformation of Poly(N-Isopropylacrylamide) Gel Hybridized with Liquid Crystalline Inorganic Nanosheets Aligned by Electric Field" Inadomi, T., Ikeda, S., Okumura, Y., Kikuchi, H. & Miyamoto, N.,Macromol. Rapid Commun., 35, 1741-1746 (2014).
“Reversible, Instant, and Unusually Stable ~100-Fold Swelling of Inorganic Layered Materials” by Fengxia Geng, Renzhi Ma, Akira Nakamura, Kosho Akatsuka, Yasuo Ebina, Yusuke Yamauchi, Nobuyoshi Miyamoto, Yoshitaka Tateyama, and Takayoshi Sasaki, Nature Commun., 4, 1632 (2013) .
“Liquid Crystalline Inorganic Nanosheets for Facile Synthesis of Polymer Hydrogels with Anisotropies in Structure, Swelling/Deswelling, and Ion Transport/Fixation” Miyamoto, N.; Shintate, M.; Hoshida, Y.; Motokawa, R., M. Annaka,Chem. Commun., , 49, 1082-1084, (2013)
“Extremely Stable Photoinduced Charge Separation in a Colloidal System Composed of Semiconducting Niobate and Clay Nanosheets”Miyamoto, N.; Yamada, Y.; Koizumi, S.; Nakato, T., Angew. Chem. Int. Ed.., 46, 4123-4127 (2007)
“Liquid Crystalline Nature of K4Nb6O17 Nanosheet Sols and Their Macroscopic Alignment”Miyamoto, N.; Nakato, T., Adv. Mater.,14, 1267-1270 (2002)
Samuel Shian, Jiangshui Huang, Shijie Zhu, and David R. Clarke, Optimizing the Electrical Energy Conversion Cycle of Dielectric Elastomer Generators, Advanced Materials, 26 (38) (2014) 6617–6621.
X.F. Zhu, G.P. Zhang, J. Tan, Y. Liu, S.J. Zhu, Damage behavior of Cu-Ta bilayered films under cyclic loading, J. Mater. Res., 22 (9) (2007) 2478-2482.
T. Tomimatsu, S.J. Zhu and Y. Kagawa, “Effect of thermal exposure on stress distribution in TGO layer of EB-PVD TBC”, Acta Mater., 51(8)(2003)2397-2405.
S.J. Zhu, K. Kucharová, J. Cadek, “High temperature creep in an Al-8.5Fe-1.3V-1.7Si alloy processed by rapid solidification”, Metall. Mater. Trans. A, 31A (2000) 2229-2237.
S.J. Zhu, M. Mizuno, Y. Nagano, Y. Kagawa, H. Kaya, “Creep and fatigue behavior of Hi-Nicalon SiC/SiC composite at high temperatures”, J. Am. Ceram. Soc., 82 (1999) 117-128.
大山 和宏
(Kazuhiro Ohyama)
福岡工大工学部電気工学科 教授
(Professor, Department of Electrical Engineering, Fukuoka Institute of Technology)
Sirichai Tammaruckwattana, Kazuhiro Ohyama, Shinji Arinaga, “Wind Turbine Emulator Based on Blade Element Momentum Theory for Variable Speed Wind Power Generation System”, IEEJ Trans, 10(S1), S96-S107
Sirichai Tammaruckwattana, Kazuhiro Ohyama, Chenxin Yue, “Experimental Assessment with Wind Turbine Emulator of Variable-Speed Wind Power Generation System using Boost Chopper Circuit of Permanent Magnet Synchronous Generator”, Journal of Power Electronics, JPE15-1-23, pp.246-255
アクチュエーター班 (Actuator Group)
木野 仁
(Hitoshi KINO)
アクチュエーター班統括 (Group Leader of Actuator Group)
福岡工大 工学部知能機械工学科 教授
(Professor, Department of Intelligent Mechanical Engineering, Fukuoka Institute of Technology)
Hitoshi Kino, Nattawut Samrejfuangfoo Kazuyuki Tsuda, Tomonori Kato, Hiroyuki Fujioka "Basic Study of Soft Actuator Using Anisotropic Gel Hybridized with Nanosheet Liquid Crystal: Analysis of Heat Characteristics and Length Control", Journal Procedia Computer Science (Accpeted).
Hitoshi Kino, Yuki Matsutani, Shota Katakabe, Hiroaki Ochi "Prototype of Tensegrity Robot with Nine Wires for Switching Locomotion and Its Calculation Method of Balancing Internal Force", Journal Procedia Computer Science (Accpeted).
Hitoshi Kino, Nobuhiro Okubo, Toshihide Ikeda, Hiroaki Ochi "Error Evaluation Method of Approximated Inverse Kinematics for Parallel
-Wire Driven System: Basic study for three-wire planar system" Journal of Robotics and Mechatronics Vol.28 No.6, pp.808-818, 2016.
Tetsuya Morizono, Kenji Tahara, and Hitoshi Kino: "A study on effect of biarticular muscles in an antagonistically actuated robot arm through numerical simulations" Journal of Artificial Life and Robotics, Vol. 22, No. 1, pp. 74-82, 2017
Hitoshi Kino and Sadao Kawamura "Mechanism and Control of Parallel-Wire Driven System" , Journal of Robotics and Mechatronics, Vol.27 No.6, pp. 599-607, 2015.
藤岡 寛之
(Hiroyuki FUJIOKA)
福岡工大 情報工学部 システムマネジメント学科 教授
(Professor, Department of System Management, Fukuoka Institute of Technology)
H. Matsukida, Y. Mieno and H. Fujioka, Reconstructing Handwriting Character Font Models with Incorrect Stroke Order, International Journal of Mobile Computing and Multimedia Communications, Vol.6, No.2, pp.1-12, 2015.
H. Fujioka, H. Kano, and C. F. Martin, Constrained Smoothing and Interpolating Spline Surfaces using Normalized Uniform B-splines, Communications in Information and Systems, Vol.14, No.1, pp.23-56, 2014.
H. Fujioka and H. Kano, Monotone Smoothing Spline Curves Using Normalized Uniform Cubic B-splines, Transactions of the Institute of Systems, Control and Information, Vol.26, No.11, pp.389-397, 2013.
H. Kano, H. Fujioka and C. F. Martin, Optimal Smoothing Spline with Constraints on Its Derivatives, SICE Journal of Control, Measurement, and System Integration, Vol. 7, No. 2, pp.104-111, 2014.
H. Fujioka and H. Kano, Monotone Smoothing Spline Curves Using Normalized Uniform Cubic B-splines, Transactions of the Institute of Systems, Control and Information, Vol.26, No.11, pp.389-397, 2013.
加藤 友規
(Tomonori KATO)
福岡工大 工学部 知能機械工学科 准教授
(Associate Professor, Department of Intelligent Mechanical Engineering, Fukuoka Institute of Technology)
専門分野(Research field)
機械力学・計測制御，生産加工学，フルードパワーシステム
Dynamics, Measurement and control, Manufacturing,
Fluid power systems
主な論文(Selected publications)
Tomonori KATO, Shunta HONDA, Mingzhao CHENG, Kazuki SAKURAGI, Manabu ONO : Fabrication of a Miniature Rubber Muscle Actuator Driven by Gas-Liquid Phase Change, JFPS International Journal of FluidPower System, Vol. 9, No. 1 p. 11-17 (2016)
Tomonori KATO, Genki HIGASHIJIMA, Takanori YAZAWA, Tatsuki OTSUBO, Katsutoshi TANAKA : Proposal of Disturbance-Compensating and Energy-Saving Control Method of Air Turbine Spindle and Evaluationof Its Energy Consumption, Precision Engineering, 43, pp.439-447 (2016)
Mitsuhiro NAKAO, Tomonori KATO, Takashi OOWAKU, Hirohisa SAKUMA,Toshiharu KAGAWA : Generation of Arbitrary Pressure
Pulsation of Wide Frequency Range for Flow Meter Testing in a Laminar Gas Pipeline, Journal of Flow Control, Measurement & Visualization, Vol.2, No.4, pp.125-137 (2014)
Tomonori KATO,Takashi OWAKU, Hirohisa SAKUMA, Toshiharu KAGAWA :Introduction of A Newly Developed Arbitrary Pressure Pulsation Generating Device for Evaluating The Characteristics of Gas Flow Meters and Sensors, JFPS International Journal of Fluid Power System, Vol. 5, No. 1 pp.16-21 (2012)
Tomonori KATO, Manabu ONO, Tomoaki HIGASHI, Kotaro TADANO, Kenji KAWASHIMA, Toshiharu KAGAWA : Proposal and Analysis of a Pneumatic Artificial Rubber Muscle with High-Damping Characteristics That Uses a Rubber Bellows, JFPS International Journal of Fluid Power System, Vol. 14, No. 1, p.1-7 (2012)
